Our art resin bundle contains everything you need to create a resin art masterpiece. If you have never tried resin art before then this is a great way to start. You will SAVE 40% on the cost of the products bought separately!
FREE DELIVERY TO UK MAINLAND
It's so easy to create a beautiful piece of resin artwork using Eli-Chem MasterCast, acrylic tints and metallic pigments. If you have never tried resin art before then this is a great way to start. Simply follow the step by step instructions on our info graphic and get creative.
If you are an experienced artist, why not buy pack as a gift for friend? The pack will be delivered in a plain box, along with instructions on how to use the products. All you need to do is wrap it up and put it under the tree!
For the starter kit we use MasterCast 1-2-1 Clear Artwork Resin as the base, it is a two component polymer material that produces an optically clear, high gloss finish on many surfaces e.g canvas, wood, mdf, glass, perspex, concrete and metal. It is ambient temperature curing, solvent free, high build and UV stable. MasterCast is an optically transparent coating casting resin that can be applied by pouring, brush or roller.
Resin Art Gift Pack contains:-
- 1 x 400g MasterCast Art Resin Tester (215g resin & 185g hardener)
- 1 x resi-TINT White 30ml
- 1 x resi-TINT Turquoise 30ml
- 1 x resi-TINT Light Grey 29.5ml
- 1 x resi-METAL Blue Steel 100g
- 1 x resi-METAL Aluminium Oxide 100g
1 x resi-BLAST Dispersion Media 25ml
If you would like to expand the colour range we have put together two resi-TINT top up packs, Purple Haze and Sunset Strip, which we hope will cover all colour themes. If you would like to add individual colours you can choose them from the resi-TINT product page.
Sunset Strip resi-TINT pack contains:-
Purple Haze resi-TINT pack contains:-
Application video for Resin Art Gift Pack
|Mix ratio|| by volume: 100 parts resin to 100 parts hardener
by weight: 100 parts resin to 90 parts hardener
|Surfaces||canvas, wood, MDF & glass|
|Curing time||touch dry in 5/6 hours at 23°C, full chemical cure in 7 days|
|Coverage||1 litre of the mixed product will cover 2m²@ 0.5 mm thick (1kg = 1 litre)|
|Pot Life||15-20 minutes at 23°C (250g mixed mass)|
|Shelf life||one year in sealed containers|
The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the resin not drying properly and lower mechanical properties.
The mixed components should be thoroughly stirred for 3-4 minutes to ensure an even consistency. Epoxy systems tend to heat up in a pot than as a thin film, only mix the amount needed for use within the pot life of the product.
The product can be applied by pouring from the mixing vessel or by brush or roller. The mixed resin can be tinted with our resi-TINT pigments, resi-METALS or res-TINT+ Metallic powders to make your artwork pop. resi-BLAST will add stunning cells and effects.
Health & Safety
Although our resins are formulated with the most modern and safest epoxy chemicals available, all epoxy resins are chemicals and should be managed and handled with proactive safety hygiene and responsible care.
- Always wear nitrile gloves (or use a specialist resin barrier cream)
- Wear a respirator when sanding partially-cured resin
- It is advisable to work in a well ventilated room
- We advise the use of safety goggles
- Avoid skin contact (if resin gets on skin wash with plenty of soap & water)
- DO NOT eat, drink or smoke while working
- In case of eye contamination wash with plenty of water for 15 minutes and consult medical advice immediately
Adding inks/paints/mica powder/glitter to epoxy resin will change its properties and may reduce its non-toxicity. If you use alcohol inks DO NOT use a flame to remove bubbles, as alcohol is flammable.
Sunset Strip tints are represented by "Stratospheric fireball" courtesy of Robert Douglas Art
Square orange & blue work courtesy of Corinne Agostini
Resin Art Gift Pack
- Brand: Eli-Chem
- Product Code: RAGP
- Availability: 1471
£94.20 Including VAT