Eli-Crush Crusher Backing Resin by Eli-Chem Resins

0 reviews
Code FR866
£0.00
£0.00
Code FR866
In stock: 0Sorry! We're out of stock
£0.00
£0.00
Save
Earn 0 reward points with this product.
  • Description

    Eli-Crush FR866 Epoxy Crusher Backing Resin is a two part, ambient temperature curing, filler extended epoxy resin with good impact resistance and very low shrinkage.

    Please contact us for availability.

    The resin is mixed with aggregate particles and spread into place where it sets to a durable, flexible surface.

    Eli-Crush FR866 shows no dermatitic properties and has a very low irritation potential at room temperature. It has low toxicity at ambient temperatures, however good industrial hygiene must be observed.

    Typical applications include the lining of primary and secondary cone crushers, grinding mills, bonding, filling, fastening, grouting of holding bolts and mould making.

    • Kit size: 10kg
    • Easy to pour and mix 
    • Minimal filler settlement in containers
    • Good penetration even at lower temperatures
    • Fast reactivity and outstanding mechanical properties
    • Good curing properties at lower temperatures
  • Used For & How To Use

    Mixing

    Block all cracks or gaps in the lining between the crusher and steel lining. If no adhesion is required, apply a grease or silicon based release agent to the crusher bowl before casting. Mix resin and hardener for 3 minutes using a spatula or other flat tool until a uniform colour is achieved.

    Application

    Pour immediately after mixing, working life is 10-15 minutes after mixing. Increases in temperature will shorten the working time, gel time and setting time. Decreases in temperature will extend the working time, gel time & setting time.

  • Technical & Safety Data


    Specifications

      Mix ratio   by volume: 100 parts resin to 11 part hardener
      by weight: 100 parts resin to 6 part hardener
      Chemical resistance    resistant to solvents, aliphatic alcohols and aromatics
      Curing time   2 hours at 20°C, 3 hours at 10°C
      Coverage  please see chart in TDS below
      Pot life   10-15 minutes at 25°C
      Shelf life  12 months in sealed containers, must be stored in dry, cool conditions 

     

    Eli-Crush Crusher Backing Resin Technical Data Sheet PDF

    Eli-Crush Crusher Backing Resin Safety Data Sheet PDF

  • Reviews (0)

    Be the first to review this product.


    Leave your own review

Related products

You may also like...

Cable Jointing

Eli-Chem supplies a broad range of cable jointing products including low voltage resin joint kits, heat shrink joint and termination kits, re-enterabl...
More stock coming soon
£0.00
Quick Look
Add to wishlist