Our Cell creating art resin starter kit contains everything you need to create a resin art masterpiece in a moody purple colourway. If you have never tried resin art before then this is a great way to start. You will SAVE 50% on the cost of the products bought separately!
FREE DELIVERY TO UK MAINLAND
It's so easy to create a beautiful piece of resin artwork using Eli-Chem MasterCast, Cell-Base Instant Cell Creator and pigments. Simply follow the step by step instructions on our infographic and get creative.
If you are an experienced artist, why not buy pack as a gift for friend? The pack will be delivered in a plain box, along with instructions on how to use the products. All you need to do is put the product in the cotton bag provided and gift it.
For the starter kit we use MasterCast 1-2-1 Clear Artwork Resin as the base, it is a two component polymer material that produces an optically clear, high gloss finish on many surfaces e.g canvas, wood, mdf, glass, perspex, concrete and metal. It is ambient temperature curing, solvent free, high build and UV stable. MasterCast is an optically transparent coating casting resin that can be applied by pouring, brush or roller.
Resin Art Gift Pack contains:-
- 1 x 400g MasterCast Art Resin Tester (215g resin & 185g hardener) & mixing stick
- 1 x Cell-Base Instant Cell Creator 75g Purple Envy
- 1 x resi-TINT MAX 50g UltraMarine
- 1 x resi-TINT MAX 50g Titanium White
- 1 x resi-METAL 100g Aluminium
- 1 x resi-TINT+ Metallic Powder 50g Copper
- 1 x large measuring cup
- 4 x small measuring cups
- 4 x wooden mixing sticks
- 1 x pair nitrile gloves
- 1 x Cotton gift bag
- 1 x instructions
Application video for Cell-Base and MasterCast
|Mix ratio|| by volume: 100 parts resin to 100 parts hardener
by weight: 100 parts resin to 90 parts hardener
|Surfaces||canvas, wood, MDF & glass|
|Curing time||touch dry in 5/6 hours at 23°C, full chemical cure in 7 days|
|Coverage||1 litre of the mixed product will cover 2m²@ 0.5 mm thick (1kg = 1 litre)|
|Pot Life||15-20 minutes at 23°C (250g mixed mass)|
|Shelf life||one year in sealed containers|
The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the resin not drying properly and lower mechanical properties.
The mixed components should be thoroughly stirred for 3-4 minutes to ensure an even consistency. Epoxy systems tend to heat up in a pot than as a thin film, only mix the amount needed for use within the pot life of the product.
Add a small amount of the Cell-Base pigment to one of the smaller cups and then add half of the mixed resin (10% Cell-Base to resin ratio) and mix thoroughly. Pour the remaining mixed MasterCast resin into each of the 3 remaining small cups. Add the 2 resi-TINT MAX and resi-METAL tints to the resin in the 3 small cups, they are very concentrated so you only need a little. the resi-TINT+ Metallic Powder can be added to one of these colours or sprinkled lightly over your artwork whilst it is still wet.
Once the resin and pigment are thoroughly mixed, spread the Cell-Base mixture onto your board as a base layer, completely covering the board. Pass a heat gun gently over the Cell-Base layer before applying the pigmented resin. Immediately pour the cups of tinted resin onto your Cell-Base layer one at a time and then swipe or drag the top colours over the base layer and watch the cells forming.
Health & Safety
Although our resins are formulated with the most modern and safest epoxy chemicals available, all epoxy resins are chemicals and should be managed and handled with proactive safety hygiene and responsible care.
- Always wear nitrile gloves (or use a specialist resin barrier cream)
- Wear a respirator when sanding partially-cured resin
- It is advisable to work in a well ventilated room
- We advise the use of safety goggles
- Avoid skin contact (if resin gets on skin wash with plenty of soap & water)
- DO NOT eat, drink or smoke while working
- In case of eye contamination wash with plenty of water for 15 minutes and consult medical advice immediately
Adding inks/paints/mica powder/glitter to epoxy resin will change its properties and may reduce its non-toxicity. If you use alcohol inks DO NOT use a flame to remove bubbles, as alcohol is flammable.
Resin Art Gift Pack - Cell-Base Deep Purple
- Brand: Eli-Chem
- Product Code: RAGPCBDP
- Availability: 49
£52.80 Including VAT