hydroflow eco resin is an environmentally friendly, water based casting compound that comes in two components - a mineral powder and a water based acrylic binder

FREE DELIVERY TO UK MAINLAND

A sustainable solution for creating functional & decorative items with a cement texture & appearance. Can be used to make smooth or textured pieces, hydroflow will replicate the most detailed texture in your mould to produce unique jewellery, creative arts and crafts. 

It has thousands of uses, limited only by the shape of your mould. Patterns can be created  in newly poured pieces using a variety of tools. 

Easily coloured with water based pigments such as our resi-TINT acrylic inks, acrylic paints or powdered tempura paints. Can be sealed and protected with hydroflow Sealer.

  • Water based & environmentally friendly eco resin
  • No harsh chemicals, odourless and VOC-free
  • Easily pigmented using resi-TINT inks or other water based pigments
  • Perfect for coasters, platters, vases, planters, soap dishes and many other items
  • Ideal for creating textured art pieces on canvas and wooden boards
  • Can be used to create the terrazzo effect 
  • Easily sanded to create different finishes
  • Mixing containers & tools can be cleaned with water after use
  • Can be demoulded in less than 1 hour
  • Everything you need in 6 kit sizes
  • Non flammable (internal tests)


How to use hydroflow water based casting compound


Specifications

  Mix ratio   2.5 parts powder to 1 part liquid activator
  Drying time    approx. 30 minutes, demould in 1-2 hours, can be sanded after 2 hours 
  Pot Life   10-20 minutes 
  Shelf life   6 months

 

Mixing

Adding colour
Use any water based pigment E.g. resi-TINT acrylic inks, acrylic paints or powdered tempura paints. Any solid can be added (sand, mica, quartzite, dried shards of hydroflow etc).

When using the whole kit
Add colour to the hydroflow activator fluid before adding the powder. Add small amounts at a time and mix in stages until you have achieved a lump-free consistency

When using part of the kit
Pour the desired amount of hydroflow activator fluid into your mixing container. Add colour to the hydroflow activator fluid before adding the powder. Add 2.5 times the amount of powder to the fluid activator E.g. if you started with 100ml (100g) activator fluid then you should add 250g powder. 2.5:1 is the default mixing ratio, but this is not set in stone. You can adapt the ratio with less or more powder to obtain a runnier or thicker consistency to suit the application. If the mixture is too viscous and thick for your application simply add a little water (5-10% by weight), the activator is a water based emulsion and can be extended and diluted further to make it more fluid.

Once you have mixed to a creamy consistency you can top up the pigment addition to achieve a stronger colour shade.

Application

Immediately pour into your mould and agitate to clear trapped air bubbles. Allow to harden in 20-40 minutes. The mould will feel warm, this is normal. Demould after 1-2 hrs.

Additional information

hydroflow...

  • can be sanded using either dry or wet/dry sandpaper to expose any terrazzo aggregate 
  • is heat resistant up to 125°C surface contact temperature
  • is porous and can be sealed by brush using hydroflow sealer or any acrylic/PVA sealer


hydroflow Technical Data Sheet PDF

hydroflow Safety Data Sheet PDF

 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

hydroflow Water Based Casting Compound

  • Brand: Eli-Chem
  • Product Code: hydroflow
  • Availability: 122
  • £29.76 Including VAT


Available Options


People who viewed this product also liked

resi-TINT Acrylic Resin Art Pigment 29.5ml

resi-TINT Acrylic Resin Art Pigment 29.5ml

A selection of 18 bright and beautiful resi-TI..

£10.98 Including VAT

hydroflow & Aqua Cast Sealer 200ml

hydroflow & Aqua Cast Sealer 200ml

hydroflow & Aqua Cast Sealer is a water based ..

£18.00 Including VAT

Metal Cast Metallic Coating 400g

Metal Cast Metallic Coating 400g

Metal Cast Metallic Coating is a water based metal..

£18.96 Including VAT

Aqua Cast Eco Resin Starter Kit GLOW

Aqua Cast Eco Resin Starter Kit GLOW

Our Aqua Cast GLOW eco resin starter kit contains ..

£26.40 Including VAT

Aqua Cast® TEXTURE Water Activated Casting Compound

Aqua Cast® TEXTURE Water Activated Casting Compound

Aqua Cast® TEXTURE eco resin is an eco-friend..

£20.40 Including VAT

Tags: hydroflow, eco resin, homeware, home decor, resin art, art structure medium, art texture medium, gypsum, cast-it, cast it, eco two, eco-two