As eco-friendly as our standard Aqua Cast®, Aqua Cast® BLACK is a pre-pigmented water activated casting/moulding material with an intense black colour giving the illusion of a ceramic finish. Polymer fortified to provide excellent cured strength and durability

FREE DELIVERY TO UK MAINLAND

Aqua Cast® BLACK is designed for pouring into silicone moulds and is 100% compatible with original Aqua Cast® and Aqua Cast® TEXTURE. Simply add to water, mix and pour.

The guide powder to water mix ratio is 100 : 25 (4 : 1) e.g. 100g powder and 25g water. Aqua Cast® BLACK can be altered to desired viscosity and tailored to the individual application. However, alterations to the guide powder to water ratio of 4 : 1 can affect the cured performance, particularly the drying time and ultimate strength.

  • Environmentally friendly, odourless and free of chemicals
  • Perfect for coasters, ornamental vases, planters, candle holders, soap dishes and detailed figurines etc.
  • Ideal for ceramics & textured art pieces and can be partnered with our art resins when using a mould
  • Excellent reproduction of detail
  • Can be used to create terrazzo pieces
  • High surface hardness and strength
  • Smooth, impact resistant surface
  • High degree of weather resistance for external applications when sealed

Aqua Cast® BLACK water activated casting compound

Specifications

  Drying time    Demould in 60-90 minutes
  For maximum cured strength 24-48 hours
  Mix ratio   100 : 25 (4 : 1) e.g. 100g of powder to 25g of water 
  Pot Life   10 minutes @ 22°C
  Shelf life   Indefinite when kept dry in storage

 

Mixing

PLEASE NOTE Aqua Cast® BLACK has an intense pigment and we strongly recommend wearing gloves and protecting clothing during casting and demoulding. The fine particle size of the powder will leave stains on hands and under fingernails etc. It is advisable to wear gloves and protect your work surfaces to prevent staining. Any residue on the skin or work surfaces can be cleaned with warm water and soap/washing up liquid or cleaning wipes.

If the inside of moulds has a black residue after demoulding, these can also be cleaned using warm water and dishwasher liquid or cleaning wipes.

Any solid can be added, sand, mica, quartzite, dried shards of Aqua Cast® BLACK etc. in small amounts. Excess solids addition weakens the cured strength and can result in the article breaking when being demoulded.

Mixing the powder

The desired viscosity & consistency can be controlled to suit the application. Alterations to the guide powder to water ratio will affect the product performance, particularly in terms of drying time. Measure the desired amount of water, add the corresponding quantity of powder gradually during mixing. For example:

  • 100g powder to 25g/ml water
  • 150g powder to 37.5g/ml water
  • 500g powder to 125g/ml water
  • Use the handy online calculator tool on this page, all you need to know (or calculate) is the volume of your mould in grams or millilitres.

    Mix by hand or with an electric mixing blade for 2-4 minutes until uniform and smooth. The mixed solution will rapidly become creamy and lump free, tap the mixing container to help remove trapped air. 

    Application

    Immediately pour into your mould and allow to settle. Any residual bubbles can be popped by agitating or tapping the mould. Allow to harden for 60-90 minutes before demoulding (temperature and mix ratio dependent). Allow to dry for 24-48 hours to build cured strength.

    Pouring guidelines for mixing art resin and Aqua Cast® BLACK

    When pouring Aqua Cast® BLACK onto previously poured resin, please ensure the resin has entered the gel phase but is not yet touch dry to allow the Aqua Cast® BLACK to adhere. This will vary depending upon depth and size of the mould. If you think you have missed the gel window, wait for the resin to dry, and thoroughly abrade to create a key before pouring Aqua Cast® BLACK.

    Aqua Cast® BLACK Technical Data Sheet PDF

    Aqua Cast® BLACK Safety Data Sheet PDF

    main picture courtesy of Paul Lovell


     

    Write a review

    Note: HTML is not translated!
        Bad           Good
    Captcha

    Aqua Cast® BLACK Water Activated Casting Compound

    • Brand: Eli-Chem
    • Product Code: Aqua Cast BLACK 1.1kg & 3kg kits
    • Availability: 68
    • £22.08 Including VAT


    Available Options


    People who viewed this product also liked

    Aqua Cast® Water Activated Casting Compound

    Aqua Cast® Water Activated Casting Compound

    Aqua Cast® eco resin is an environmentally friendl..

    £22.80 Including VAT

    Aqua Cast® TEXTURE Water Activated Casting Compound

    Aqua Cast® TEXTURE Water Activated Casting Compound

    Aqua Cast® TEXTURE eco resin is an eco-friend..

    £20.40 Including VAT

    Tags: Aqua Cast BLACK, AquaCast, eco resin, homeware, home decor, resin art, art structure medium, art texture medium, gypsum, plaster, Aqua-Cast, Aquaflow, res20, eco one, eco-one, eco pour